I received this a couple months ago but as most of you know I was out of commission for a bit so I am finally getting to this, sorry for the delay. I do need to thank
Jim Oberling of
Slate River LLC. for all his help and for the products themselves, I am sure I will be getting a lot of use out of this.
I was contacted by Jim and he had these camera mounts that he thought I could get some use out of so I said sure send them my way. The first one he sent me was the
EZ-AimGame Camera Mount but with the type of camera I have I could not use it so he also sent me a adapter kit that goes with it.
EZ-Aim stick on Adapter
This adapter is for game cameras that do not have a 1/4 - 20 threaded insert on the bottom of the camera. It requires a 3 inch x 1.75 inch flat surface on the back of the camera. Installation is quick and easy:
- The 3" x 1.75" flat surface must be free of oil and grease
- The surface is lightly sanded with the sandpaper in the kit
- The primer is applied and allowed to dry
- The clear plastic cover on the bottom of the adapter is removed and the adapter is positioned and firm pressure is applied for at least 30 seconds
- After the adapter is attached the mounting stud can be rotated 90 degrees by loosening the large nut, pushing the stud down, rotating the stud 90 degrees and retightening the nut
- The adapter is attached to the ball stud on the EZ-Aim Game Camera Mount and you are ready to go
The adapter has a weight of 3 ounces so you will not even notice that it has been added to your camera.
My game camera with the
EZ-Aim mount
Here is the
adapter kit which includes the adapter, primer and a piece of sandpaper.
The back of the camera case that will be lightly sanded in forground,
After lightly sanding the area where the adapter will be I had to basically paint it with the primer that was included in the kit.
After sanding and applying the primer I had to peel off the protective plastic cover on the adapter.
I had to then place the adapter on the spot and firmly press and hold for at least 30 seconds.
The finished product, one adapter mounted to the back of my camera case.
 |
| camera used in this pic is not mine but it is what it would look like. |
|
|
Here is the adapter kit which includes the adapter, primer and a piece of sandpaper.
2 comments:
Slate River is one of our sponsors, Rick, and their products are awesome.
We've been using the trailcam mounts the last few months, and we'll be using their bow hangers come fall.
It's great stuff.
Arthur, I agree. They have been nothing but helpful to me and now that I have the adapter mounted I can't wait to get the camera out into woods.
Post a Comment